Reviews (5)
Works great but I've had zero luck with using masking tape on it. It may be the primer I've been using. Going to run more tests.
✓ Recommends this product
Excellent value. Cuts through every paint I use regardless of brand. At $10 it's a steal.
✓ Recommends this product
Some of the worst joints I've seen on an MG. Ankles are too loose, and the hands are trash. They can barely manage to hang on to weapons that don't really weigh anything. Only buy if you want to put in the extra effort required to keep the kit together.
Update: Keep this thing charged. Plan your jobs in small sessions, or stay plugged in. Good introduction to airbrushing, but im wishing I had spent the money towards an actual airbrush setup. I bought this bc I saw newtype answer a quality question with them saying they stand by the products they list. I love it. I've spent hours hand brushing, and 5 minutes with this blew all of my previous work out of the water. Easy to set up, works great. I have no clue what I'm doing and got fantastic results. I'm heavy on the trigger and probably got around 45 minutes of spray time. Gets pretty dang hot. I don't really let off the trigger while I'm painting a piece so it's likely my fault.
✓ Recommends this product
I had a blast building the kit. It looks great oob, but if you're the type of person that likes panel lines, and color separation, it will need some customizing. Great for people that like blank canvases, a chore for those that like kits to already have them. The articulation isn't all that great, especially in the hips, and the peg that connects the wings to the backpack is a little loose, which causes them to sag sideways.
✓ Recommends this product
Builds (1)
Questions (10)
Enamel or lacquer? Prethinned? Gloss or matte? Item description needs at least the bare minimum.
October 16, 20232 Answers:
I think he said it was splash paint
October 16, 2023
Pre-thinned confirmed in the video.
October 16, 2023
Any idea where I can get replacement o rings and needles? Total noob and don't know sizes.
November 13, 20221 Answer:
You can try reaching out to the manufacturer for replacement parts.
April 18, 2023
Do you have to mix with thinner or is it ready to go? If it has to be thinned, I'm assuming odenkans lacquer thinner would work best?
July 24, 20221 Answer:
Yes, these paints will need some thinning and their thinner will be best.
August 12, 2022
Can you panel line a plated kit?
June 25, 20221 Answer:
Not unless you top coat it. Cleaning up panel lining also removes the coating.
February 15, 2023
Are these water slides or decals like what come in the kit?
May 26, 20221 Answer:
Water slides.
May 31, 2022
What should I thin this with?
April 9, 20221 Answer:
It would be best to thin this product with Odenkan's Thinner: https://newtype.us/p/LGioWFttIa9XFmQPAr8m/h/odenkan-sc-03-thinner
April 11, 2022
If I want to buy a different airbrush later, can I use this compressor with it?
April 2, 20221 Answer:
Unfortunately, this product cannot be used with other airbrushes unless you have some sort of adapter. I would suggest purchasing one of these instead if you would like to use it with a different airbrush: https://newtype.us/p/WmoMYeHe3JBxwwUW17tg/h/funnel-universal-portable-compressor
April 3, 2022
I'm having a lot of difficulty finding any reviews for this gun. Is it the same as the no name?
March 28, 20222 Answers:
Hi, can you specify more about this "no name" airbrush? The airbrush included in this product is a standard 0.3mm dual-action airbrush.
April 4, 2022
This is a Newtype-specific reprint of the newest No-Name airbrush by Spray Gunner which has been a high quality and recommended product with overwhelmingly positive reviews itself.
September 13, 2022
I'm assuming I can paint this on with a brush?
March 4, 20221 Answer:
Yes, you are able to airbrush or hand paint with these paints.
March 10, 2022
Man this is beautiful. If I didn't already have this kit in its box, I'd scoop this up in a heartbeat.
March 4, 20221 Answer:
What was your question?
May 23, 2022
Answers (1)
Now lol
May 14, 2022