Reviews (4)
Rejoice!! This does contain the files for the individual parts, it is not just one huge block. Consider what similar models go for elsewhere this is a dang good price.
✓ Recommends this product
The tonal difference between each coat is staggering from a lighter deep blue to near black blue which I went with. Light coats at low pressure is the key here, your patience will be rewarded.
✓ Recommends this product
Very good paint, all of Odenkan's stuff is very good but can take a learning curve from other paints. Couldn't resist picking up Gary!
✓ Recommends this product
So I will say when used properly the finish you get is amazing and it cannot be overstated the convenience of not having to buy and apply separate chrome and clear red paint. It worked perfectly well over G-Paints black paint. However, you have to use a LOT of it to really get the best effect. If you're going for a darker matte look then you are able to get away with just using 1 coat as I did with the shield shown. If you are going for the candy rich red like shown on Chars Zaku here you basically have to use half the bottle. As far as performance its amazing it just comes down to if the convenience is worth the amount used and spent for you. Overall would recommend and wanted to post pictures to help! P.S. little to no flakes!!!
✓ Recommends this product
Builds (4)
Questions (10)
Is this file one big piece or does it come seperated?
November 12, 20231 Answer:
seperated
December 30, 2024
What kind of bases are shown in the images for the gunbits?
July 4, 20231 Answer:
It’s the WFM weapon base. You’ll need 2 to display all the bits.
July 4, 2023
What is a good thinning ratio for this, I noticed it is very thick out of the bottle?
June 12, 20231 Answer:
1:1 with Mr. Hobby leveling thinner. Maybe a little more thinner if you're using a metallic. The leveling thinner really is a must though for mr. Hobby lacquers.
April 15, 2024
Is the thinning ratio for this same as the others of 1:1-3?
June 9, 20231 Answer:
Yes
June 21, 2023
Can this work as a base coat or does it need a primer under it?
June 6, 20231 Answer:
This is the same as Gaia's standard lacquer black, just in a bigger bottle. It is not marked as a primer.
June 6, 2023
What is a good thinner ratio for this paint and would Mr. Color thinner work well?
May 26, 20231 Answer:
I go 1 part paint to 1.5 part thinner 1:1.5 ratio but ive gone 1:2 also for light coats., i use metallic master but Mr self lvl 400 is good.
May 28, 2023
What is a good thinner ratio for these, does 1:1 or 1:2 work well?
May 21, 20231 Answer:
I'd recommend thinning it to a 1:1 ratio then adding more if needed
May 23, 2023
What kind of procedure is there to airbrush this paint?
May 14, 20231 Answer:
You thin it to your preferred ratio (start with 50/50 and go up as needed) and paint it over a gloss black base coat
May 15, 2023
What is the proper application process for this paint? Is it pre-thinned?
April 29, 20232 Answers:
Gaia Ex-Flat white is best airbrushed. This is not pre thinned. You can thin this by using a ration of 1:1-3 paint to thinner ration. I use a 1:2 ratio.
April 30, 2023
yes needs to be thinned, I use 1:1.5 or 1:2 great results
May 1, 2023
do you need to use primer with this paint?
April 16, 20231 Answer:
Yes, it is always recommended to use primer for best results.
April 19, 2023
Answers (2)
no gary compares to this gary, but I would recommend slightly thinning it
June 20, 2023Now
May 24, 2023